Circulation Systems

CIRCULATION SYSTEMS

V R Coatings offers centralized and localized (booth side) paint circulation systems. Range of Elephant pumps are mainly suitable for centralized circulation systems and Range of Hippo pumps are mainly used for localized paint circulation system. Elephant are high delivery moderate pressure four valve pumps and suitable for shear sensitive metallic paints and viscous water base paints. The main features of paint circulation systems (Centralized Elephant range pumps) supplied by V R Coatings are as below: High delivery stainless steel pump with high performance motors for less fluctuation. Pneumatically sensed motor, less wear & tear component. Specially designed packing for working at low pressures. Four ball pumps (in Elephant range). This reduces pulsation, paint sheer. Polished pipelines without hose joints i.e. vibration free system. Maintenance free piping with flange joints for perfect sealing. Pipes are connected face to face without step or a gap. Flange joint gives no settling of paints in joints and pipes are connected face to face. Easy and quick flushing at color change. Piping is designed considering velocity requirements, suspension & sheering of the paints while flowing. SS 304 inside polished tanks. Pneumatically operated piston type lubrication free motors for stirrer.- less air consumption compared to Vane type motors.- Constant speed motor at different volumes of paint in tank. Vane motor rpm increases as load is reduced i.e. as paint level fall.- Different rpm kills metallic paint i.e. reduces gloss level of paint. All pressure gauges with ss 304 diaphragm, very easy to clean when paint shade is changed. Very effective piston pump for transfer, pump starts at 0.5 bar. Technical and maintenance support available even after warranty periods. Tube in Tube SS 304 easy to flush high efficiency heat exchanger if required. High volume pulsation dampeners, cartridge type/bag type supply & return filters.

Pipe Coating Applications

	PIPE COATING SYSTEMS VR Coatings offers Internal/External pipe-coating systems as listed below: A) Internal coating equipment for non rotating pipe Internal airless spray-painting with hollow cone spray nozzle up to 300 mm ID pipe. Internal centrifugal impeller type spray-painting equipment for pipe ID 100 mm to 300 mm. Internal airless rotating nozzle type spray painting equipment for pipe ID from 300 mm and above up to 2.5 meter. B) Airless internal / External spray painting of rotating pipe C) External airless spray painting with fixed spraying ring for pipes moving on conveyor. D) External airless spray painting with oscillating automatic spraying ring for pipes laid on or under the ground.

BARREL/DRUM PAINTING SYSTEM

BARREL PAINTING SYSTEM

VR Coatings offers painting systems with multiple colors for external and internal surfaces of barrels and drums. More than 10 nos. of 200 ltrs barrel painting systems (production rate more than 300 ltrs/hr) made by V R Coatings are delighting the barrel manufactures in INDIA.

EXTERNAL PAINTING OF 200 LTRS BARREL

Following are the main features of this system:

• Painting is done by 13 numbers of Spray Guns which includes individual Spray Guns for the bung and two Spray Guns with Cut Nozzle for fine band.

• 13 Nozzles gives fast application, almost 300 barrels/hr without over-spray.

• In-built Paint Heaters at lower pressures enables the paint to form a spray. Drop in viscosity reduces over-spray, saves paint, results uniform coating and fast drying.

• High volume output Pump offers Pulsation free uniform volume.

• PLC control panel gives full proof performance with High flexibility for adjusting various paints.

For Barrel Painting with three colors i.e. top & bottom band, central band and top & bottom cover, the Automatic Painting process for 200 ltr. Barrel is as per below:

• The Barrel enters the Spray Booth and starts rotating on the Spinner.

• The Control Panel is triggered no sooner the Barrel enters the Spray Booth.

• Independent Painting for three colors starts at intervals covering the entire container. After completion of painting , the barrel is ejected out towards the flash off zone on the conveyor when all the Spray Guns are OFF

.............................................................................................................................................................

INTERNAL PAINTING FOR 200-LTRS. BARREL

Following are the main features of this system

• Servo driven accurate lancing system.

• Painting is covered by 3 nos. of spray guns.

Note:
Customized barrel paint systems for other sizes and specifications available on requirement.

SORRY, STILL UNDER CONSTRUCTION.

SprayDing worldwide...VR coatings

VR Coatings is making its presence felt in international market by virtue of superior design, ruggedness and reliability of its equipment.

Thorough technical know how and adequate infrastructure ensures equipment with highest quality at reasonable cost.This helps us to overcome competition in domestic and international market.

News: VR Coatings introduces new pump CUB for localized/centralized painting system. For more information click Here

Manufacturers of Heavy Duty Airless Spray Painting Equipments, Medium Duty Airless Spray Painting Equipments, Low Pressure Paint Transfer Pumps, Low Pressure High Volume Transfer Pumps, Drum Press Equipments, Two Component Hot Airless Spray Painting, Electronic Variable Ratio Components, Accessories For Spray Painting Equipments

Name:
Email Address:

This form powered by Freedback