BARREL/DRUM PAINTING SYSTEM

BARREL PAINTING SYSTEM

VR Coatings offers painting systems with multiple colors for external and internal surfaces of barrels and drums. More than 10 nos. of 200 ltrs barrel painting systems (production rate more than 300 ltrs/hr) made by V R Coatings are delighting the barrel manufactures in INDIA.

EXTERNAL PAINTING OF 200 LTRS BARREL

Following are the main features of this system:

• Painting is done by 13 numbers of Spray Guns which includes individual Spray Guns for the bung and two Spray Guns with Cut Nozzle for fine band.

• 13 Nozzles gives fast application, almost 300 barrels/hr without over-spray.

• In-built Paint Heaters at lower pressures enables the paint to form a spray. Drop in viscosity reduces over-spray, saves paint, results uniform coating and fast drying.

• High volume output Pump offers Pulsation free uniform volume.

• PLC control panel gives full proof performance with High flexibility for adjusting various paints.

For Barrel Painting with three colors i.e. top & bottom band, central band and top & bottom cover, the Automatic Painting process for 200 ltr. Barrel is as per below:

• The Barrel enters the Spray Booth and starts rotating on the Spinner.

• The Control Panel is triggered no sooner the Barrel enters the Spray Booth.

• Independent Painting for three colors starts at intervals covering the entire container. After completion of painting , the barrel is ejected out towards the flash off zone on the conveyor when all the Spray Guns are OFF

.............................................................................................................................................................

INTERNAL PAINTING FOR 200-LTRS. BARREL

Following are the main features of this system

• Servo driven accurate lancing system.

• Painting is covered by 3 nos. of spray guns.

Note:
Customized barrel paint systems for other sizes and specifications available on requirement.